Shopping Cart


Warning: This product contains nicotine. Nicotine is an addictive chemical.

Vaping Tutorial: How To Prime Vape Coil Most Effectively?

What Is A Vape Coil?

Nowadays, most e-cigarettes or vape packages that are “open systems” (i.e. with a refillable tank) feature replaceable “atomizer heads”. These are usually simply described as “vape coils” as well as contain the coil cord and also wicking material. The wick soaks up the e-liquid as well as the coil cord warms the juice up and transforms it right into vapour. Many coils include either cotton or ceramics as the wicking product.

Previous Posts:

How To Clean Vape: 6 Steps To Make It Brand New

CBD Vape Juice: The Best Choice For Your Vaping

What Is The Purpose Of Priming The Vape Coil?

Priming your coils is necessary for both performances as well as the lifespan of your coil. A completely dry hit is an extremely unpleasant experience, accompanied by a burning, unpleasant taste as the wick material is singed and also your e-liquid gets “overcooked.”

A coil that hasn’t been primed will not execute in addition to one that has been primed (specifically when it comes to taste), yet the most significant problem is that firing your vaping tool when the wick is still a little bit completely dry threats melting the cotton.

If you end up shedding your wick by being as well anxious to begin vaping, this can not be repaired unless you totally replace the wick. This is normally a fiddly and also challenging process with pre-made coils, as well as more recent vapers particularly will likely have to throw the entire atomizer head away and replace it with a new one. This is even worse due to the fact that the coil you’ll be tossing out will certainly be essentially all new: you’re simply tossing your money away.

Make the effort to find out to appropriately prime your coil so you do not wreck a perfectly great vape coil as well as risk leaving yourself with absolutely nothing to vape.

how to prime vape coil

Steps To Prime Vape Coil

Luckily, priming your vape coil is easy to do and also you won’t forget how to when you’ve learned it. Also without guidelines, keeping in mind that you need to ensure the cotton wick is totally taken in e-liquid prior to you start vaping ought to be enough to avoid any type of disasters. However, there are many specific steps in many vapers’ priming procedures, and also you can follow them through to obtain your coils perfectly topped each time.

STEP 1: Wet The Cotton Through The Top Of The Atomizer Head

Almost all atomizer heads have an opening at the top. When the vape coil is brand new, you might be able to see the coil in the centre if you look down right into it from the top, however, you will absolutely be able to see the white cotton twisted around the inside of the chamber. Take the e-liquid you’re likely to be utilized to fill out, as well as by hand soak this cotton from the top.

This is simpler if you have the atomizer head different from the other elements of the container, yet you can do it with the head screwed right into the base of the tank if you favour.

Ideally, you’re wanting to completely wet the wick without presuming that e-juice swimming pools up inside the atomizer head. Utilize the dripper spout of your container or the glass dripper top to guide the e-juice straight to your wick, as well as include e-juice bit by bit so you don’t go too far. Proceed up until all the wick you can see is taken in e-juice.

If you end up with some pooling in the chamber, you can shake any kind of excess out onto a paper towel. If you still have to merge when you try to vape, later on, you’ll wind up with a gurgling sound and also potentially some juice obtaining gobbled right into your mouth via the mouthpiece.

STEP 2: Wet The Cotton Visible Through The Wicking Ports

Atomizer heads have little “home windows” or “wicking ports” around the outside to draw e-liquid in from your tank, as well as you must have the ability to see cotton with these also. The next stage of the priming procedure is including e-liquid directly to these from the exterior.

This is extremely easy: just trickle some e-juice to saturate the bits of the wick you can see and ensure you obtain all of the home windows. Considering that you’ve already soaked the inside, as long as the cotton you can see perspires, you will not have any type of problems.

STEP 3: Assemble And Fill Up The Tank

The first stage of the priming is now total, so you can screw your new coil into the base of the tank (if you haven’t currently) and also put the rest of the tank together. Currently, fill your container with e-liquid.

Exactly how precisely you do this will depend upon your tank, yet contemporary storage tanks normally have a top-filling system that could require you to loosen the top cap of the storage tank (which holds the mouthpiece) before filling it out. Constantly prevent the main tube, since this leads right down to your coil. Fill the storage tank to the level suggested by the supplier and re-attach the leading cap.

STEP 4: Take Some Dry Pulls

Inhaling from your mouthpiece without pressing the fire switch is called a “completely dry pull.” This is crucially various from a dry hit since you do not push the fire switch, so the coil doesn’t fume and also you do not get any vapour.

However, a dry pull does draw liquid right into the atomizer head via the wicking ports, as well as this serves for priming. Cover the air movement holes in your container with your fingers and also take in between 3 and 5 completely dry pulls, being careful not to suck also difficult since this could flood the coil. Just inhale at a comfortable rate a few times and also you’re excellent to go.

STEP 5: Have A Little Patience

The previous actions have reduced the requirement to wait before you begin to vape, but leaving the full container 5 minutes is still an excellent preventative measure to take. This lets the e-liquid from the storage tank soak into the wicks normally.

Truly, even with no of the various other steps, if you waited enough time with a complete tank before vaping your coil would certainly end up keyed through this alone. However, the steps you’ve already taken have actually decreased this waiting duration from 20 to half an hour to around 5. There is no injury in waiting longer, however, leave it a minimum of 5 minutes before proceeding to the following action.

STEP 6: Start On A Lower Wattage

You might head directly for your usual setting and start vaping, however, taking things gently lowers the risk you’ll obtain a completely dry hit as well as destroy your coil. If you usually vape at 40 W, decrease your power setting to 20 W and after that take a few clouds of smoke.

Cutting your normal power setup in half is simply a last preventative measure to make sure every little thing is effectively topped before you begin vaping customarily. Progressively boost your setup up until you reach your normal level. Once you get there, you can maintain vaping as typical: you have actually efficiently primed your coil.

How To Prime MTL Vape Coil?

MTL coils have resistances of more than 1.0 ohms. Popular with the present and former cigarette smokers, these vaporizers attract vapours into the vaper’s mouth and afterwards into their lungs with breathing.

The actions for keying an MTL vape coil are relatively comparable to those of below ohm coils, except that it isn’t essential to place a couple of e-liquid decreases onto the vape coil to prime it.

All you require to do is put the brand-new vape coil right into the vape container’s base, fill up the storage tank, set up the vape tank, and after that wait between 5 to 10 minutes to allow the wick to get to complete saturation. Then, you’re ready to enjoy vaping.

How To Prime A Vape Coil For Refillable Pods?

Refillable pods utilize refillable shucks that utilize a pre-installed coil. Refillable pods are exceptionally easy to prime, simply comply with these simple actions:

  • Fill the pod with the e-liquid of choice
  • Connect the refillable pod to the pod device and allow it to sit for 10 minutes
  • Breathe in on the skin with no power, this helps press the e-liquid into the wicking channels to make certain the wick is totally filled
  • Start vaping!
vape coil

Covering systems do not have alternatives to adjust the electrical power, so just vape shorter smokes to barge in the coil. If you take a long hit with a brand-new coil it can melt it. So remember to begin with much shorter smokes!

It is necessary to require time to prep and also prime your brand-new vape coil to ensure that you are getting the most from it as well as not burning it straight out of the box. Discover more about the reasons your coils burn out to ensure you never shed a coil again!

The e-juice you utilize issues if you intend to extend the life of your vape coil. At VapePenZone, we can assist you to discover the ideal e-juice for you! If you prefer to select your own vape products after that visit our store which features leading brand names and the most prominent items! Check out our selection of vape starter kits, disposable vape, vaporizer and more!

Leave a Reply
Product Warranty

1 year warranty on all items

Weekly Sales

All collections price drop every Wednesday

Flash Sales

Limited vapes $0.98 every Friday 3PM