Have you ever experienced a happy vaping time being interrupted by a Vuse Vape malfunctioning?
The reasons why Vuse Vape not working have always been a nuisance for Vuse Vaper.
However, with this efficient guide based on my 5-year vaping experience, you can no longer be bothered by this problem!
Let’s unveil the reasons and solutions for Vuse Vape not working!
Introduction
Vuse Australia is a highly acclaimed vape brand that is recognized for its sleek design and practical features.
In response to customer feedback on why the Vuse Vape not working, we have created and promoted this quick guide for troubleshooting.
As a typical example, we will use the Vuse ePod 2 Vape to describe the following four parts based on its features.
- 6 reasons why the Vuse ePod 2 Vapes device not working
- 3 reasons why the Vuse ePod 2 Vape Pod not Working
- 5 solutions to fix Vuse ePod 2 Vapes not working
- 5 proper preservation ways of Vuse ePod 2 Vape
8 Reasons Why The Vuse Vapes Device Not Working
When it comes to Vuse Vapes device not working, it can result from the following reasons.
- Extreme temperature
- Battery running out
- Excessive vaping time
- Blockage
- Defective contact
- Coil wear
3 Reasons Why The Vuse Vape Pod Not Working
Except for the vape device not working, there may be a few reasons for pod not working:
- Pod e-liquid running out
- Pod e-liquid leaking
- Blockage between the pod and mouthpiece
Reason:
- If the temperature is below 0℃, the vape is not available to be activated or charged.
- If the temperature is over 25℃, the battery life would be reduced and flavour lessened.
Solution:
- Store Vuse ePod 2 Vapes in a cool, dry place away from sunlight and heat sources.
- Keep the temperature between 0-25℃, with 20℃ being the optimal temperature for storage and use.
Signal:
- When the Vuse ePod 2 Vape battery is drained out, there will be a flashing light 3 times to warn you to charge at once.
Solution:
- Charge your ePod 2 Vape using the official magnetic cable for 0.5 hours and enjoy all-day vaping.
Reasons:
- If you’ve vaped for longer than 5 seconds or taken more than 40 seconds in 1 minute, the protection function will activate to prevent overheating.
- Prolonged vaping time would also wear out the coil and decrease the efficiency.
Solutions:
- Pause vaping for at least 10 seconds to reactivate the Vuse.
- If it doesn’t work, send photos or a video of device failure to customer service.
Reasons:
- Leakage: Even if the battery is fully charged, The vape leaking or pod leaking will cause it not to work.
- Blockage: A blockage within the device or pod can obstruct airflow and vapour circulation, leading to operational interference, overheating, and even atomization damage.
- Defective contact: It is usually caused by the loose connection or missing parts.
Solutions:
- Check the leaking issues: Replace your pod or refill the pod if it leaks or runs out of e-liquid.
- Clean the blockage: Remove the mouthpiece from the ePod 2 Vape to clean the pod and internal parts with a cotton swab.
- Reconnect the defective contact: To avoid current falling pass through properly while charging, check if you lost the core functional parts and contact our customer service. If not, then reconnect the pod and the magnetic part, the battery and the mouthpiece tightly to ensure they work.
If you experience these 2 situations, we recommend you purchase a new one from vapepenzone:
- Battery corrosion: If the battery is corroded, it will be hard to clean the harmful product. Changing a new battery or a new Vuse is the fastest solution.
- Coil wear: If the coil is already worn out and you are unfamiliar with disassembling work, then replace a new vape instead.
How To Preserve The Vuse EPod 2 Vape Properly
To avoid Vuse ePod 2 Vape not working, I consider that proper daily preservation plays an important role.
Here, I will share 5 tips to preserve the Vuse ePod 2 Vape:
1. Appropriate environment (cool & dry)
A cool and dry environment away from dampness, sunlight, fire, and other heat sources is the basic preservation condition of Vuse ePods.
2. Appropriate temperature (0-25℃)
- Temperature below 0℃ would block the activation of the ePod 2 Vape.
- Temperature over 25℃ would damage the battery life and lessen the flavour.
3. Avoid high-pressure environments
Don’t take Vuse ePod 2 Vape into a high-pressure environment like a plane. It would cause the pod to leak.
4. Control vaping time
- Excessive vaping time would cause Vuse Vapes automatic shutdown and coil wear, reducing the battery life.
- Control your vaping time at 2-3 seconds between puffs.
5. Place it straight
To prevent e-liquid from leaking, store your ePod 2 Vape upright and hold it straight while vaping.
Verdict
Above all paragraphs are my experience with the problem of Why Vuse Vape not working. Have you clarified all of these reasons and solutions?
One last mention: we strongly do not recommend you fix yourselves when Vuse Vape not working. Please contact our customer service first.
Any consequences due to your own fixing, dissembling and assembling action would be on your account.
If you have any further questions or want more information about Vuse Vapes, please visit our official website vapepenzone.
FAQ About Vuse Vape Not Working
Why is my Vuse lighting up but not working?
Taking the Vuse ePod 2 Vape as an example, the Vuse Vape lighting up but not working can be attributed to 3 reasons:
- If the Vuse ePod 2 Vape flashes 3 times, it is a low battery warning.
- If the Vuse ePod flashes 10 times, it is a short-circuit signal.
- If your ePod 2 Vape is constantly shining but not producing vapour, it may be due to an e-liquid shortage or an obstruction within the device.
Having ruled out these situations, If you are still wondering why is my Vuse not hitting but lighting up, you could ask our customer service for help.
Why is my Vuse device not turning on?
Vuse device not turning can be due to 3 reasons:
- You have been vaping for over 5 seconds, which would trigger the automatic shutdown functions to stop you from activating and puffing the vape.
- This shutdown will also occur when you puff over 40 seconds within 1 minute.
- The battery is in a short circuit.
- The battery is low
Why is my Vuse vibrating and not letting me use it?
Vuse Vapes vibrates and stops working when the battery is below 30% or 10%, indicating that it needs to be charged immediately.
Why is my Vuse ePod 2+ not working?
Vuse ePod 2+ not working is due to these reasons:
- Extreme temperature
- Battery running out
- Excessive vaping time
- Blockage
- Defective contact
- Coil wear
- E-liquid leaking
If you want more information, you could also search Vuse Vape not working Reddit on the Internet.
How much nicotine is in a Vuse ePod 2 Vape?
Vuse ePod 2 Vape contains 3% or 4% nicotine content varies on your options.
How to fix defective Vuse Pod?
If you find your Vuse Pod replacement is defective, we suggest you turn to customer service and buy a new one.
Any consequence due to personal assembling or fixing by yourselves is on your account.